Base Legs
Fifth Wheel
Fire Resistant Hydraulic Fluid
P-6 Die Puller
R-5 Roller Bed
Wheel Material
|
Stacker OptionsAir Power
Drum Grab Handler DG30
Height
Larger Motor - AC
Remote Control
Reversed Forks
|
|
|
|
|
Standard straddle dimensions can be increased or decreased to fit any size pallet or load. Available on straddle fork models only.
Recommended for lifts with wide straddles and heavier load capacities. 8″ polyurethane plastic wheel and spring loaded handle. Factory installed on B800 and BT800 series only. FW: Weight 32 lbs.
Water-glycol fluids are fire resistant, non-explosive and non-toxic. Approved by Factory Mutual Insurance Engineering Laboratories.
Equipped with hand operated winch with cable and hook for pulling dies over roller bed. 27″ x 30″ roller area mounted 32″ x 30″ slip on platform. 1000 lb. Capacity. P-6: Weight 185 lbs. (Requires 18″ L.C.)
Excellent for transferring heavy objects to/from lift with minimum effort. Front or side loading. Rollers on 3″ center. 27″ x 30″ area, mounted on a 32″ x 36″ slip on platform. 1000 lb. Cap. R-5: Weight 145 lb. (Requires 18″ L.C.)
Standard wheels are phenolic plastic. Optional Wheel material available
Optional air motors that operate from your factory airline supply are available. At 1000 lb. Cap. Requires 30 cfm @ 80 psi air supply. At 1500, 2000 and 2700 cap. Requires 45 cfm @ 80 psi air supply
Automatically grabs 30 and 55 gallon drums for handling and stacking in a vertical position. Mounts on the backplate of any straddle fork model. Parrot-beak mechanism for steel and fiber drums.
Standard lift heights can be decreased to meet special handling requirements. For telescopic mast units consult factory.
Doubles lifting speed on Presto AC Electric lifts; 1 Phase, 60 cycle, 220V, 2HP or 2HP, 220/440V, 3 phase, 60 cycle AC motor. Larger unit available. Consult Factory
Not for lifting personnel. Must be factory installed. For battery or Electric AC operated lifts. RC-10: One station. Weight 2 lbs. RC-20: Two station. Weight 4 lbs. FC-10: Foot control. Weight 15 lbs.
Ideal for overhead installation. Forks can be modified in a reverse position giving an increased lowered / raised height.Ram
 |
Model Number | Description and Specification | Shipping Weight |
| Interchanges with forks on adjustable fork models with sheet metal back plates, for roll and coil handling | |||
| RR1 | Ram 2½″ round x 20″ long, 1000 lb capacity @ 15″ load center | 13 | |
| RR2 | Ram 2½″ round x 24″ long, 1000 lb. Capacity @ 18″ load center | 16 | |
| RR3 | Ram 2½″ round x 13″ long, 1000 lb capacity @ 13″ load center | 12 | |
| RR4 | Ram 2½″ round x 30″ long, 1000 lb capacity @ 20″ load center | 20 | |
| RS1 | Ram 3″ square x 20″ long, 1500 lb capacity @ 15″ load center | 15 | |
| RS2 | Ram 3″ square x 24″ long, 1500 lb. Capacity @ 18″ load center | 24 | |
| RS3 | Ram 2½″ square x 30″ long, 1500 lb capacity @ 20″ load center | 22 | |
| RS4 | Ram 3″ square x 30″ long, 1500 lb. Capacity @ 20″ load center | 27 | |
| Interchanges with fork models with shaft (ps) back plate | |||
| RSPS24 | Ram 3″ square x 24″ long, 1500 lb capacity @ 18″ load center | 35 | |
| RSPS30 | Ram 3″ square x 30″ long, 1500 lb capacity @ 20″ load center | 35 | |
| RSPS36 | Ram 3″ square x 36″ long, 1500 lb capacity @ 24″ load center | 35 | |
Boom with Hook
 |
Model Number | Description and Specification | Shipping Weight |
| Mounts on fork model with sheet metal backplates for lifting and suspending loads. | |||
| B13 | 13″ boom with hook, 1000 lb capacity @ 13″ load center | 22 | |
| B15 | 15″ boom with hook, 1000 lb capacity @ 15″ load center | 22 | |
| B20 | 20″ boom with hook, 1000 lb capacity @ 20″ load center | 25 | |
| Mounts on fork models with shaft (ps) back plate | |||
| B20-15PS | 20″ boom with hook 1500 lb capacity @ 20″ load center | 35 | |
| B24-15PS | 24″ boom with hook 1500 lb capacity @ 24″ load center | 45 | |
Forks
 |
Model Number | Description and Specification | Shipping Weight |
| C119-25 | Adjustable forks, pair 25″ length | 62 | |
| C119-30 | Adjustable forks, pair 30″ length | 72 | |
| C119-36 | Adjustable forks, pair 36″ length | 114 | |
| C119-42 | Adjustable forks, pair 42″ length | 130 | |
| BP | Forks bolted in place | N/A | |
| FF | Forks flat to the floor | N/A | |
| Mount on fork models with sheet metal backplates (fork back with clips) | |||
| C119-1 | Pair 12″ backs 25″ length with 15″ L.C. used on M200 series | 62 | |
| C119-2 | Pair 14″ backs 30″ length with 18″ L.C. used on M400 series | 72 | |
| C119-3 | Pair 15½″ backs 25″ length with 13″ L.C. used on C62, C74 | 66 | |
| C119-4 | Pair 15½″ backs 30″ length with 15″ L.C. used on C62-15, C74-15 | 76 | |
| C119-5 | Pair 15″ backs 30″ length with 20″ L.C. used on B800 1500/2000 lb. | 72 | |
| C119-11 | Pair 12″ backs 25″ length with 15″ L.C. used on B600 1500/2000 lb. | 62 | |
| C119-16 | Pair 12″ backs 36″ length with 18″ L.C. used on EPFT 1500/2000 lb. | 114 | |
| Mount on fork models with shaft (ps) backplate | |||
| C119-18 | Pair 12″ backs 36″ length with 18″ L.C. used on EPFT 1500/2000 lb. | 114 | |
| C119-12 | Pair 12″ backs 30″ length with 18″ L.C. used on EPFT 1500/2000 lb. | 80 | |
| C119-9 | Pair 14″ backs 30″ length with 20″ L.C. used on EPFT 1500/2000 lb. | 80 | |
| C119-7 | Pair 14″ backs 36″ length with 24″ L.C. used on PS, PST 1500/2000 lb. | 114 | |
| C119-PS-42 | Pair 14″ backs 42″ length with 24″ L.C. used on PS, PST 1500/2000 lb. | 128 | |
Slip on Platform
 |
Model Number | Description and Specification | Shipping Weight |
| SP24 | Slip-on platform, 24″ x 24″ for 13″ and 15″ load center | 32 | |
| SP32 | Slip-on platform, 32″ x 32″ for 18″ and 20″ load center | 52 | |
| SP40 | Slip-on platform, 40″ x 36″ for 24″ load center | 95 | |
| Custom Platform sizes available, please consult customer service | |||