EMC B10 Straddle Stacker
Adjustable Straddle Leg Design
Capacity 2,200 lbs.
The new Jungheinrich EMC is an electric stacker with a capacity of 2,200 lbs. to the full lifting height of 62″ or 79″. The EMC is available in both, the Fork Over and the Straddle Leg version. Not only constructed for a warehouse, it is the ideal tool to lift a variety of objects. You can use it in a grocery or repair shop. Thanks to its innovative design, the new Jungheinrich EMC requires only limited space and provides a unique blend of advantages.
Construction:
The swift is a four-wheel truck with a steerable drive wheel, a supporting wheel and two load-bearing wheels. Hoods that are easy to open provide easy access to all units. The operating controls are located in the control handle head.
Safety Features:
- The discharge monitor deactivates the fast speed function when the voltage is low to prevent exhaustive discharge.
- When the control shaft is released, a gas pressure spring causes it to be pushed into the upper position.
Controls:
The multi-function handle head with exemplary ergonomics provides optimum operator comfort and safety. The operating buttons for lining/lowering and horn can be reached without hand changes.
Drive System:
0.3 kW permanent magnet motor with shunt wound characteristics. Motor protection circuit for terminal overload. Power transmission via two-stage gear unit with high efficiency. Grease lubrication.
Brake System:
Magnetic brake acting on motor shaft, operated through the handle. Braking position with handle pressed down and handle in upright position with simultaneous interruption of the main power circuit. Asbestos-free brake.
Drive wheel:
Standard Polyurethane tires. Drive wheel dia. 9.06″ x 3.15″ wide. Castor Fork Over dia. 5.91″ x 1.97″ wide; Straddle Legs dia. 5.51″ x 1.97″ wide, spring loaded, springing 0.59″.
Standard 62" Specifications : $5,475.00 4/07
- Capacity 2,000 lbs.
- Load Center 24″
- Overall Length 67.25″
- Overall height 77.5″
- Fork Length 46″
- Adjustable Straddle legs, ID 42″ to 54″
- Turning Radius 55.3″
- Maximum Raised Height: 62.5″
- Magnetic brake on motor
- Electronic Speed Control
- Emergency Stop Plug
- Battery Discharge Indicator
- Key Lock
- 6 months warranty on parts, hydraulic unit and frame
- 2 x 12 volt 60 AH maintenance free batteries and automatic battery charging system included
- Carriage with adjustable forks: Additional $500
|
|
Load wheels:
Easily replaceable Polyurethane tires dia. 3.35″ x 2.76″ wide.
Steering System:
By means of long, low slung safety handle. Low steering forces. Handle may be swiveled through 180°.
Lifting and Lowering:
Hydraulically through high pressure pump with powerful 1 kW series wound motor.
Mast:
The sturdy single mast permits optimum visibility conditions.
Forks:
Sturdy and torsion resistant box forks.
Battery / Charger:
2 x 12V / 60 Ah, maintenance free. Standard built-in micro processor controlled battery charger with charge control light, compensating charge and maintenance charge. Charging of the batteries via any main socket (Alternating Current (AC) 120V).
Standard Features:
- Electronic Speed Controller
- Emergency Stop Plug
- Battery Discharge Indicator
- Charge Control Lamp
- Battery Charging Plug
- Key Lock
- Mast Covering
EMC B10 79" Specifications: $5,555.00 4/07
- Capacity 2,000 lbs.
- Load Center 24″
- Overall Length 67.25″
- Overall height 95″
- Fork Length 46″
- Adjustable Straddle legs, ID 42″ to 54″
- Turning Radius 55.3″
- Maximum Raised Height: 79″
- Magnetic brake on motor
- Electronic Speed Control
- Emergency Stop Plug
- Battery Discharge Indicator
- Key Lock
- 6 months warranty on parts, hydraulic unit and frame
- 2 x 12 volt 60 AH maintenance free batteries and automatic battery charging system included
- Carriage with adjustable forks: Additional $420
|
|
|
|
